Home > Video > Video Display > CM540A Automatic Case Maker Machine for Hard Cover Book Case production, case making machine

CM540A Automatic Case Maker Machine for Hard Cover Book Case production, case making machine

"Equipment to produce: hard cover book, cover, covering, lining, ring binder, boxes, slipcases, board slitting, board grooving, etc. 
Please contact jodie for more production introduction and solutions.  Mob: +86-13676595054 "

CM540A Automatic Case Maker Machine for Hard Cover Book Case production, case making machine

"CM540A Automatic Case Maker

Automatic case maker adopts automatic paper feeding system and automatic cardboard positioning device; there are features of accurate and quick positioning, and beautiful finished products etc. It is used to make hardcovers, notebook covers, calendars, hanging calendars, files, Irregular covers etc.

1. The feeder in this machine adopts back-push feeding system, which is controlled pneumatically, and its structure is simple and reasonable.
2. The width between stacker and feeding table is adjusted concentrically in the centre. The operation is very easy without error.
3. New designed copper scraper cooperates with the glue roller more compactly, effectively avoiding paper winding. And it is much more durable.
4. Adopt imported ultrasonic paper tester device, simple operation which can keep two pieces of layered paper from entering into the machine at the same time.
5. The cardboard feeding table is controlled by linear guide line and servo motor, its location is correct and quick.
6. In the cardboard feeding table, the machine can automatically stop when lack of paper to reduce rejection rate.
7. Conveyor belt is equipped with a powerful vacuum fan to keep the paper without any movement.
8. Paper feeding and positioning system adopts imported high-precise photoelectric control device to make the paper and cardboard location more accurate.
9. The folding unit adopts servo motor, no displacement and no scratches.
10. Pneumatic pressure control for folding, concentric shaft adjustment for trimming, easy to operate; it also adopts a new technology on the folding way which solves the problem of irregular covers.
11. The whole machine adopts PLC control, featuring in simple operation. The troubles are displayed directly on the screen, which helps the operator easily remove them.
12. Low electricity consumption, low noisy and easy adjustment.

Integrated Safety Cover                       Pneumatic Pressure Control
New Angle-Repair                             High-end Electrical Appliance

Main Technical Parameter: 
 Automatic case maker CM540A
1 Paper size(A×B) MIN: 130×230mm    MAX: 570×1030mm
2 Paper thickness 100~200g/m2
3 Cardboard thickness(T) 1~3mm
4 Finished product size(W×L) MIN: 100×200mm   MAX: 540×1000mm
5 Spine(S) 10mm
6 Folded paper size(R) 10~18mm
7 Max quantity of cardboard 6pieces
8 Precision +-0.50mm
9 Production speed ≤25sheets/min
10 Motor power 5kw/380v 3phase
11 Heater power 6kw
12 Air Supply 10L/min 0.6Mpa
13 machine weight 3900kg
14 Dimension L8500×W2300×H1700mm
1. The max and mini sizes of the covers are subjected to those of the paper and the quality of the paper
2. The production capacity is 25 cover per minute. But the speed of the machine depends on the sizes of the covers
3. We don't provide air compressor."
Communicate with Supplier?Supplier
What can I do for you?
Chat Now Contact Supplier